System Version; Network Online Users; Poe Usage; Network Load - Bosch DIVAR 3000 Operation Manual

Network/hybrid video recorder
Hide thumbs Also See for DIVAR 3000:
Table of Contents

Advertisement

68
en | Operation
9.4.3

System Version

View here the status of your installed system:
Notice!
Bosch strongly recommends upgrading to the latest firmware for the best possible
functionality, compatibility, performance and security.
Check http://downloadstore.boschsecurity.com/ regularly to see if there is a new firmware
version available.
9.4.4

Network Online users

Manage here the online users:
The system displays a list of the blocked users, and refreshes every five seconds to detect any
newly added or deleted users. To unblock a user, select the user and choose <Unblock>.
9.4.5

PoE usage

This info page shows a list of all cameras connected to the PoE slots, and the total amount of
power they are using. Use the Block checkbox for a camera to prevent the camera drawing a
PoE supply from that slot.
9.4.6

Network Load

See here a real time graphical display of the current load on the network for send and receive
traffic. There are two network connections and the load can be seen for each network by
selecting the relevant network interface.
9.4.7

Network Test

Choose here to do a network test as follows:
1.
2.
3.
Or choose to do a Network sniffer packet export as follows:
1.
2.
3.
4.
2016.09 | v1.0 | AM18-Q0717
Fan speed (only for DIVAR 3000 models) - values shown are Current, Average, Highest,
Lowest)
hardware features (device, channels, alarms in/out)
software features
system version of your currently installed firmware
build date of the firmware
web id
serial number
Disconnect a user by selecting the user and press <Disconnect>.
Block a user for a max disconnection time:
Select the user
Click Block time (default is 60 seconds) and select <Block >
Enter a Destination IP address.
Click <Test>.
Check the test result in the Test result field.
Enter a Device name (click <Refresh> if the device is not shown).
Enter an Address (click <Browse> to search for the correct path).
Select LAN.
When the correct sniffer packet is shown, click
Operation Manual
DIVAR 2000 / DIVAR 3000 / DIVAR
to start the export.
Bosch Security Systems
5000

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Divar 2000Divar 5000

Table of Contents