Table of Contents
Advertisement
I N S TA L L AT I O N - S I N G L E P O L E
STEP 1
Turn OFF the power at the circuit breaker.
STEP 2
Remove the existing faceplate and switch from the gang box. Take a
photo of the existing wiring for future reference.
STEP 3
Confirm the gang box contains a neutral wire (typically white). If
there are no neutral wires present, you may need to run additional
wires, please consult a qualified electrician.
NOTE: Your home's wiring may differ; please consult a qualified electrician.
8
Advertisement
Table of Contents
