Page 1
In the Box Inside your Socket box, you will find: 1 iDevices ® Socket 1 Quick Start Guide System Requirements iPhone 4s and later ® iPad 3rd generation and later ® iPad mini™ and later iPod touch 5th generation and later ®...
Screw in your Socket and turn on the power to the socket Please note that the power to the Socket must always be on. The Socket will blink blue indicating it is ready to be set up on the network.
Pressing the button on the side of the unit will turn the Socket on or off. Bulb Dimming and control of the LED ring is performed in the iDevices Connected App. iDevices Connected App ® Ensure your iOS device’s Wi-Fi is turned on and is connected ®...
Page 4
In the app, find the Socket you’d like to connect to and tap the add icon. Confirm your home network. The Socket will quickly flash green then turn solid blue to indicate it has successfully joined your home network. If this is your first HomeKit product, the app will walk you ™...
Using The Product Once the Socket is set up, you can control the color of the LED light from the iDevices Connected App, or choose to turn the LED light off. Pressing the button on the side of the unit will manually turn the Socket on or off.
Page 6
Go to Settings > iDevices. Make sure everything in turned ON. If Home Data was turned off, turn it on. Cycle your WiFi off, then on again. Go to Settings > iCloud. Make sure you are logged in to your iCloud account...
Page 7
The accessory is waiting for the handset to configure the accessory’ Wi-Fi . The LEDs flash blue. ® Pairing The Socket is waiting for the iOS device to initiate and complete pa set up through Wi-Fi .The LED is solid blue. ® Pairing Expired Pairing mode has expired and the accessory is waiting for the user t press the button for about 3 seconds to reenter pairing mode.
MODE DESCRIPTION information, hold the button down for 10 seconds until the LEDs rapidly flash red. When the button is released the unit will reboot an reenter the pairing mode. Identify When the accessory receives a request to identify itself, it rapidly flashes purple.
Page 9
Regulations Product Information: Manufacturer: iDevices ® Model: IDEV0002 FCC ID: 2ABDJ-SOCKET IC: 11569A- SOCKET FCC Compliance Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 10
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy.
Page 11
This device complies with Industry Canada license-exempt RSS Standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s).
Page 12
References Requires the iDevices Connected app. ® For warranty information please visit iDevicesinc.com/warranty Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App store is a service mark of Apple Inc. HomeKit is a trademark of Apple Inc.
Need help?
Do you have a question about the Socket and is the answer not in the manual?
Questions and answers