iDevices Wall Switch Installation & Setup Manual page 3

Single pole & 3-way configurations
Table of Contents

Advertisement

• Not intended for critical medical or life support equipment.
• Use caution when using the iDevices
mechanical motion, or could create a hazardous condition when operated while unattended.
• The iDevices
Wall Switch is not user-serviceable. Do not attempt to open the enclosure for any reason.
®
• The iDevices
Wall Switch must be installed in a manner that conforms to all applicable national,
®
state, and local building codes.
• The iDevices
Wall Switch is intended for dry, indoor use only.
®
• Ambient operating conditions: 32º F to 104º F (0º C to 40º C), 0-90% humidity, non-condensing.
• Use with branch circuit breaker 20A or less.
• Notice - Use only copper or copper-clad wire with this device.
RISK OF ELECTRIC SHOCK, SEVERE BURNS, AND FIRE:
!
Electricity is dangerous and can cause personal injury and property damage if handled improperly.
A working knowledge of electrical installation is required to install this product. If you are not
comfortable working with electricity do not attempt to install the iDevices
professional assistance from a qualified electrician.
Wall Switch to control any appliances which produce heat or
®
Your safety is important to us.
Wall Switch and seek
®
3

Advertisement

Table of Contents
loading

Related Products for iDevices Wall Switch

Table of Contents