G E T T I N G T O K N O W T H E
i D E V I C E S
Turn Light On. Used also for 3-way, 4-way pairing.
1
Turn Light Off. Used also for connecting to the Wi-Fi
2
Status LED/Night Light. Provides setup status and used as a night light
3
during operation. Refer to LED color codes on page 42.
Pull Out Tab. Refer to this when prompted to enter your HomeKit™
4
setup code during the setup on a iOS device. Also used to document the
Wall Switch as the Primary or Secondary in a 3-way or 4-way configuration.
5
Device Reboot. Pressing this cycles power to the device.
6
WA L L S W I T C H
®
network.
®