Table of Contents
Advertisement
LED State Description
When Wall Switch has lost the connection to the Wi-Fi
network, (e.g., the link
®
is down) the LED slow flashes orange until the link is up.
Orange Flash
To initiate a device reset, which will clear all Wi-Fi
and pairing information,
®
press the Pairing Button
down for 10 seconds until the LED rapidly flashes
6
red. When the button is released the unit will reboot and re-enter the pairing
Red Flash
mode.
When Wall Switch receives a request to identify itself, or a software update is
being performed, it flashes purple.
Purple Flash
43
Advertisement
Table of Contents
