About Timer Recording; Timer Recording (Manually) - Philips DVDR3305 User Manual

Recording

About timer recording

Use 'Timer Recording' to automatically
start and stop a recording at a later date/
time. The DVD recorder will tune to the
right programme channel and begin
recording at the specified time.
With this DVD recorder, you can
preprogramme up to 8 recordings.
To make a timer recording, your
DVD recorder needs to know:
– The date you want to make the
recording.
– The recording input source.
– The start and stop time of the
recording.
– The recording mode, see page 28.
OK
About 'VPS/PDC'
'VPS' (Video Programming System) or
'PDC' (Programme Delivery Control) is
used to control the start and duration of
TV channel recordings. If a TV programme
starts earlier or ends later than was
scheduled, the DVD recorder will then
switch on and off at the correct time.
If you want to programme a time that is
different from the VPS/PDC time, you
must turn off VPS/PDC.
TIPS: Ensure that there is sufficient space available on the DVD+R/+RW before recording.
You have to finalise the DVD+R before it can be played on other players, see page 36.
30
16861_dvdr3305_05_eng5.indd 30
(continued)
TIMER

Timer recording (manually)

Turn on the TV power. Select the
A
correct Video In channel at the TV.
Press TIMER on the remote control.
B
The timer schedule list appears.

Timer Schedule
Source RecMode Date
1
2
3
4
5
6
Press OK on the remote control.
C
The VIDEO P

LUS
appears.
VIDEO Plus+ System
Enter the VIDEO Plus+ programming
number for the show you wish to
record. Press [RETURN] to return
to timer schedule or [TIMER] to
exit timer.
5
Confirm
Select in the menu and press OK.
D
CANCEL
The timer editor menu appears.

Timer Editor
Source
Rec Mode
Mode
Date
Start
End
VPS/PDC
OK
Use  keys to select an entry in the
E
menu and press  to enter its options.
Start End VPS
+ System menu
®
Cancel
OK
Ch003
2 Hour Mode
Once
31 / 01 / 05
10 : 33 : 57
11 : 03 : 57
Off
Cancel
OK
2005-06-29 4:09:54 PM