Chapter
2
Getting Started
Wired Network Connection
If your wireless router (access point) does not support WPS, you can
connect the Disklavier to a wireless router (access point) using an Ethernet
cable.
1
Press the POWER
2
(For grand pianos) Connect the wireless router (access
point) to the LAN port on the control center unit using an
Ethernet cable.
(Grand piano)
Control center unit
(For upright pianos) Connect the wireless router (access
point) to the LAN port on the inlet box using an Ethernet
cable.
(Upright piano)
3
Enable the DHCP server function on the wireless router
(access point).
17
button to turn the power off.
Ethernet cable
Inlet box
Ethernet cable
Wireless router
(access point)
Wireless router
(access point)
Note:
The inlet box is located on the rear
of the piano.
Note:
For details on the DHCP setting, refer
to the owner's manual supplied with
your wireless router (access point).