Yamaha DISKLAVIER ENSPIRE ST/PRO Owner's Manual page 13

Chapter
1
Introduction
■ Switch Box (Rear Panel)
AUTO PLAY switch
1
Activates or deactivates the auto play function. You
can make settings for the auto play function using
the ENSPIRE Controller app.
AUTO OFF MODE switch
2
Activates or deactivates the auto power-off
function. Set this switch to ON to turn the power off
automatically if you do not use the Disklavier for the
time specified with the ENSPIRE Controller app.
Note:
When set to ON, the Disklavier automatically turns off under the
following conditions:
• No operation is performed on the switch box.
• No operation is performed on the ENSPIRE Controller app.
• The keyboard is not being played.
• The Disklavier does not receive the MIDI data.
3 MAINTENANCE button
For service personnel only. Do not touch this
button.
3
1 2 3 4
USB port
4
Used to connect the USB wireless LAN adaptor
(UD-WL01).
Note:
The unit cannot detect the USB flash memory if two or more
memories are connected at the same time.
WLAN switch
5
Sets the method for wireless LAN connection when
connecting the USB wireless LAN adaptor to the
USB port. See "Connecting the Disklavier and
Smart Device to a Network" on page 12.
5