Program Speed; Warm White Led Brightness (Manual Mode); Display Lock; Ramp Mode - SHOWTEC LED BLINDER 2 COB Manual

LED Blinder 2 COB

6. Program speed

With this menu, you can set the built-in program speed.
01) Press the MODE button until the display shows
02) Press the UP/DOWN buttons to increase/decrease the program speed. The adjustment range is
between 1-16, from slow to fast.

7. Warm White LED brightness (Manual Mode)

With this menu, you can set the Warm White LED brightness.
01) Press the MODE button until the display shows
02) Press the UP/DOWN buttons to increase/decrease the Warm White LED brightness. The adjustment
range is between 0-255, from dark to brightest.

8. Display lock

With this menu, you can activate/deactivate a display lock.
01) Press the MODE button until the display shows
02) Press the UP/DOWN buttons to activate/deactivate a display lock.
03) If you choose "Yes" and the display turns OFF after 10 seconds, you will have to press and hold down
one of the menu buttons (MODE, UP/DOWN) for 3 seconds. The display will turn ON.
04) If you choose "No", the display will remain continuously ON.

9. Ramp Mode

With this menu, you can set the Dimming curve.
01) Press the MODE button until the display shows
02) Press the UP/DOWN buttons to increase/decrease Dimming curve. The adjustment range is between
0-4.
Ordercode: 30780
15
.
.
.
.