Table of Contents
Advertisement
Industrial PCs IPC1300
5.4 C
HECK OF READINESS FOR OPERATION
Check the device for any hidden damage caused by improper transport, improper
operating or storage conditions or by improper use (e.g. smoke development from the
device, etc.). Immediately shut down the device and prevent any further accidental
commissioning if any damage is detected.
Pos : 23 /D atentec hni k/Schnitts tell en/Exter ne Tastatur/Exter ne Tastatur für OPC / CPC / PLC / OTC / ITC / VMT-Serie / IPC 51/ 53/11/5500 @ 1\mod_1242716042480_681.doc @ 5557 @
Pos : 25 /D atentec hni k/Bedienung/Status-Anzeig en/SYS- LED/SYS- LED für OPC / CPC / PLC / OTC / ITC / VMT (+Monitore) - Seri e / IPC 5100 / 5300 / 5500 / 1100 @ 1\mod_1204714132162_681.doc @ 3406 @
5.5 S
TATUS INDICATORS
SYS LED (
Depending on the colour and type of flashing, different device states are displayed by the
SYS LED.
The following signals are displayed:
•
•
Pos : 26 /D atentec hni k/Bedienung/Status-Anzeig en/PLC-LED/PLC- LED für CPC-Serie / PLC-Serie / IPC 1100 @ 0\mod_1158913634323_681.doc @ 835 @
Pos : 27 /D atentec hni k/Schnitts tell en/Sc hnitts tell eneinstellung/Sc hni ttstelleneins tell ung für IPC 1100 @ 0\mod_1158917563619_681.doc @ 851 @
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
)
BICOLOURED
LED lights green
LED is off
The device is ready for operation (Power ON).
The device is switched off. (Power OFF)
17
Advertisement
Table of Contents
