Table of Contents
Advertisement
Industrial PCs IPC1300
3.4 M
OUNTING PROCEDURE
•
•
•
Note:
The device is connected to the power supply using a lead out terminal with a screw
connection. A ground connection does not have to be made, because the grounding
conductor of the device plug or supply connection serves this purpose. If additional
grounding conductors are attached to a grounding screw, a wire diameter of at least 2.5
mm² is specified.
Pos : 16 /D atentec hni k/Stec kkar tenei nbau/Hi nweis vor dem Einbau/Hi nweis vor dem Einbau für IPC 1100 @ 0\mod_1158843763624_681.doc @ 775 @
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
Use the drilling template to drill holes according the mounting illustration in the
control panel with the specified threading.
Insert the upper screws half way into the control panel and hang the device on the
mounting links.
Tighten the screws and insert the rest of the screws.
13
Advertisement
Table of Contents
