Tools And Test Equipment - Cisco GS7000 Installation And Operation Manual

Chapter 3 Installation

Tools and Test Equipment

Required Tools and Test Equipment
The following tools and equipment are required for installation.

Torque wrench capable of 5 to 12 ft-lbs (6.8 to 16.3 Nm)

4-inch to 6-inch extension for torque wrench

1/2-inch socket for strand clamp bolts and cover bolts

1/4-inch flat-blade screwdriver

#2 Phillips-head screwdriver

Long-nose pliers

1/2-inch deep-well socket for seizure connector

True-rms digital voltmeter (DVM)

EXFO FOT 22AX optical power meter with adapters

Optical connector cleaning supplies

Optical connector microscope with appropriate adapters for your optical
connectors
Node Fastener Torque Specifications
Be sure to follow these torque specifications when assembling/mounting the node.
Fastener
Housing closure bolts
Test point port plugs
Housing plugs
Strand clamp mounting bracket bolts
Pedestal mounting bolts
Module securing screws
(Tx, Rx, PS, and SM/LCM modules)
66
Torque Specification
5 to 12 ft-lbs
(6.8 to 16.3 Nm)
5 to 8 ft-lbs
(6.8 to 10.8 Nm)
5 to 8 ft-lbs
(6.8 to 10.8 Nm)
8 to 10 ft-lbs
(10.8 to 13.6 Nm)
25 to 30 in-lbs
(2.8 to 3.4 Nm)
Illustration