Electrostatic Discharge - Cisco GS7000 Installation And Operation Manual

Important Safety Instructions
Wristwatch and Jewelry - For personal safety and to avoid damage of this

equipment during service and repair, do not wear electrically conducting objects
such as a wristwatch or jewelry.
Lightning - Do not work on this equipment, or connect or disconnect cables,

during periods of lightning.
Labels - Do not remove any warning labels. Replace damaged or illegible

warning labels with new ones.
Covers - Do not open the cover of this equipment and attempt service unless

instructed to do so in the instructions. Refer all servicing to qualified service
personnel only.
Moisture - Do not allow moisture to enter this equipment.

Cleaning - Use a damp cloth for cleaning.

Safety Checks - After service, assemble this equipment and perform safety

checks to ensure it is safe to use before putting it back into operation.

Electrostatic Discharge

Electrostatic discharge (ESD) results from the static electricity buildup on the human
body and other objects. This static discharge can degrade components and cause
failures.
Take the following precautions against electrostatic discharge:
Use an anti-static bench mat and a wrist strap or ankle strap designed to safely

ground ESD potentials through a resistive element.
Keep components in their anti-static packaging until installed.

Avoid touching electronic components when installing a module.

Batteries
This product may contain batteries. Special instructions apply regarding the safe use
and disposal of batteries:
Safety
Insert batteries correctly. There may be a risk of explosion if the batteries are

incorrectly inserted.
Do not attempt to recharge 'disposable' or 'non-reusable' batteries.

Please follow instructions provided for charging 'rechargeable' batteries.

Replace batteries with the same or equivalent type recommended by

manufacturer.
x