Cisco GS7000 Installation And Operation Manual page 89

What to Inspect
Connectors
Wiring and cables
Cleaning
Clean exterior surfaces of the equipment at least annually.
Consumable Materials
Use the materials listed below (or equivalent) when cleaning the equipment.
Item
Isopropyl alcohol
Cheesecloth
Spray-type contact cleaner
Procedure
Clean the equipment as described below.
1 Use a small paintbrush to brush dust from connectors.
2 Wipe surfaces dry with clean, dry cheesecloth.
3 Clean exterior surfaces with clean cheesecloth moistened with isopropyl alcohol
or general-purpose detergent. Do not let alcohol or detergent get inside
equipment or connectors.
How to Inspect
Inspect for:

broken, loose, bent, corroded, or missing pins

cracked insulator inserts

Inspect for:

cuts, nicks, burns, or abrasions

exposed bare conductors

sharp bends

pinched or damaged wires

broken or loose lacing or clamps
Specification
TT-I-735
CC-C-440
(none)
Preventative Maintenance
71