Adjusting The Loop Handle; Mounting The Deflector - Stihl FSA 65 Instruction Manual

English

Adjusting the Loop Handle

Your new power tool comes with the
loop handle mounted on the drive tube,
but it must be turned and lined up to suit
your requirements.
1
Loosen the star knob (1) on the
N
handle.
Turn the handle to the vertical
N
position.
38
A
The loop handle can be adjusted to suit
the height and reach of the operator and
the application by changing
distance (A).
Recommendation: distance (A):
about 10 cm
Slide the handle to the required
N
position.
Tighten down the star knob so that
N
the handle cannot be rotated on the
shaft.

Mounting the Deflector

1
Position your trimmer so that the
N
mowing head (1) faces up.
The motor housing has guide slots
(arrows) to correctly locate the deflector.
3
3
Push the deflector (2) into the guide
N
slots as far as stop.
Insert the screws (3) and tighten
N
them down firmly.
FSA 65, FSA 85
2