Dmx Linking; Control Panel Description - Chauvet COLORdash Par-h12 ip Quick Reference Manual

DMX Linking

The COLORdash Par-H12 IP will work with a DMX controller using a 5-pin DMX serial connection. A DMX Primer is
available from www.chauvetprofessional.com.
DMX Connection
The COLORdash Par-H12 IP uses a 5-pin DMX data connection for its DMX personalities: 6Ch, 8Ch, and 13Ch. See the
User Manual for information about connecting and configuring the product for DMX operation.
When using this product in an outdoor IP65 type environment, be sure to use IP65 (or higher) rated
data cables and secure unused ports with attached IP65 covers.
Master/Slave Connection
The COLORdash Par-H12 IP uses the DMX data connection for its Master/Slave mode. See the User Manual for
information about how to connect and configure the product for master/slave operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check the DMX controller's User Manual or with the manufacturer as not all DMX controllers
have this capability. The COLORdash Par-H12 IP supports RDM protocol that allows feedback to make changes to menu
map options. Download the User Manual from
Mounting
Before mounting this product, read the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/
Product Mounting Diagram
Overhead
Mounting

Control Panel Description

Button
<MENU>
<ENTER>
<UP>
<DOWN>
Passcode
After being prompted, enter the following passcode by pressing:
<UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
This passcode cannot be changed and must be used whenever prompted.
COLORdash Par-H12 IP QRG Rev. 3
QUICK REFERENCE GUIDE
www.chauvetprofessional.com
Safety Notes. Use at least one mounting point per product. Make sure the
Mounting Clamp
Safety Cable
Exits from the current menu or function
Enables the currently displayed menu or sets the currently selected value into the
selected function
Navigates upwards through the menu list or increases the numeric value when in a
function
Navigates downwards through the menu list or decreases the numeric value when in
a function
for more details.
Floor Mounting
Function
EN
2