Technical Data - Mini COOPER S Owner's Manual

REFERENCE

Technical data

Vehicle features and op‐
tions
This chapter describes all standard, country-
specific and optional features offered with the
series. It also describes features that are not
General information
The technical data and specifications in this
Owner's Manual are used as guidance values.
The vehicle-specific data can deviate from this,
e.g., due to the selected special equipment,
country version or country-specific measure‐
ment method. Detailed values can be found in
the approval documents, on labels on the vehi‐
Dimensions
The dimensions can vary depending on the
model version, equipment or country-specific
measurement method.
The specified heights do not take into account
attached parts, e.g., a roof antenna, roof racks
MINI 3-door
Width with mirrors
Width without mirrors
Height
Length
Wheelbase
Smallest turning radius diam.
244
Technical data
Online Edition for Part no. 01 40 2 915 044 - X/16
necessarily available in your vehicle, e. g., due
to the selected options or country versions. This
also applies to safety-related functions and sys‐
tems. When using these functions and systems,
the applicable laws and regulations must be
observed.
cle or can be obtained from a dealer's service
center or another qualified service center or re‐
pair shop.
The information in the vehicle documents al‐
ways has priority over the information in this
Owner's Manual.
or spoiler. The heights can deviate, e.g., due to
the selected special equipment, tires, load and
chassis version.
inches/mm 76.1/1,932
inches/mm 68/1,727
inches/mm 55.7/1,414
inches/mm 151.1-152.5/3,837-3,874
inches/mm 98.2/2,495
ft/m 35.5/10.8