Mini COOPER S Owner's Manual page 91

Engine temperature display
Displays the current engine temperature, based
on a combination of coolant and engine oil
temperature. As soon as the optimum operat‐
ing temperature has been attained, the indica‐
tor is in the center position.
If the engine oil or coolant, thus the engine, be‐
come too hot, a Check Control message is dis‐
played.
When the engine temperature is too
high, a red indicator lamp is displayed.
When the engine oil temperature is too
high, a red indicator lamp is displayed.
Check the coolant level, refer to page 216.
With equipment version with Head-up
Display and navigation: distance to
destination
The distance remaining to the destination is
displayed if a destination is entered in the navi‐
gation system before the trip is started.
The distance to the destination is adopted au‐
tomatically.
With equipment version with Head-up
Display and navigation: time of arrival
The estimated time of arrival is displayed if a
destination is entered in the navigation system
before the trip is started.
The time must be correctly set.
Speed Limit Info
Further information, see chapter Speed Limit
Info.
Onboard computer on the Control
Display
Concept
The onboard computer displays different vehi‐
cle data on the Control Display, such as average
values.
Online Edition for Part no. 01 40 2 915 044 - X/16
Displays
General information
The vehicle features two types of onboard
computers.
▷ "Onboard info": average values, such as the
fuel consumption, are displayed. The values
can be reset individually.
▷ "Trip computer": the values deliver an over‐
view of a certain distance and can be reset
as often as necessary.
Calling up the onboard computer or trip
computer
Via the onboard monitor:
1. "Vehicle info"
2. "Onboard info" or "Trip computer"
Resetting the onboard computer
Via the onboard monitor:
1. "Vehicle info"
2. "Onboard info"
3. "Consumpt." or "Speed"
4. "Yes"
Resetting the trip computer
Via the onboard monitor:
1. "Vehicle info"
2. "Trip computer"
3. "Reset": all values are reset.
"Automatically reset": all values are reset
approx. 4 hours after the vehicle has come
to a standstill.
Driving Excitement
The concept
On the Control Display, sport instruments can
be displayed, and the vehicle condition can be
checked before the use of the SPORT program.
CONTROLS
91