Mini COOPER S Owner's Manual page 72

Hide thumbs Also See for COOPER S:
Table of Contents

Advertisement

CONTROLS
Interval mode or rain sensor
Concept
The rain sensor automatically controls the time
between wipes depending on the intensity of
the rainfall.
General information
The sensor is located on the windshield, directly
in front of the interior mirror. Without the rain
sensor, the frequency of the wiper operation is
preset.
Safety information
NOTE
If the rain sensor is activated, the wipers
can accidentally start moving in vehicle washes.
There is a risk of property damage. Deactivate
the rain sensor in vehicle
Activating/deactivating
Press button on the wiper lever.
Wiping is started.
If the vehicle is equipped with a rain sensor:
LED in wiper lever lights up.
If wipers are frozen to windshield, wiper opera‐
tion is deactivated.
During trip interruption with the rain sensor
switched on: if the trip is resumed within ap‐
prox. 15 minutes, the rain sensor is automati‐
cally activated again.
72
Driving
washes.◀
Online Edition for Part no. 01 40 2 915 044 - X/16
Setting the frequency or sensitivity of
the rain sensor
Turn the thumbwheel to adjust the frequency
or sensitivity of the rain sensor.
Up: short interval or high sensitivity of the rain
sensor.
Down: long interval or low sensitivity of the rain
sensor.
Windshield washer system
Safety information
WARNING
The washer fluid can freeze onto the win‐
dow at low temperatures and obstruct the
view. There is a risk of an accident. Only use the
washer systems, if the washer fluid cannot
freeze. Use antifreeze, if
NOTE
When the washer fluid reservoir is empty,
the wash pump cannot work as intended.
There is a risk of property damage. Do not use
the washer system when the washer fluid res‐
ervoir is
empty.◀
needed.◀

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

John cooperworksCooper

Table of Contents