Electrical Accessories - Carlyle 06D Service Manual

3.29 — Electrical Accessories
TERMINAL BOX PACKAGE - This consists of terminal
box, cover, and necessary mounting components.
TERMINAL
BOX
TYPE
PACKAGE
NUMBER
06DA660078 Drawn Steel
06DA660075 Fabricated
06DA660150 Fabricated
06EA660095 Drawn Steel
TERMINAL LUG PACKAGE -
consists of six, screw-on terminal lugs with set screws. The
HY85TB004 and HY85TB008 packages consist of one
terminal lug (six required per compressor).
TERMINAL LUG
PACKAGE
NUMBER
06DA660095
HY85TB008
HY85TB004
TERMINAL PLATE JUMPER PACKAGE FOR 06E,
06CC 50 TO 99 Cfm - This package consists of jumper bars,
terminal nuts and instructions to interconnect terminal studs
for proper motor starting (PW or XL) and voltage.
JUMPER
PACKAGE
NUMBER
06EA660141
06EA660097
NOTE: With 06E multi-volt (208/230/460) compressors, the 460-volt motor can be con-
nected only for across-the-line start. A compressor with a distinct 460-volt motor (or desig-
nated P/W) must be used for part-winding start.
All 06D 2-cyl. (6" x 5-3/4") (15.2 x 14.6 cm)
All 06D 4-cyl. (6" x 5") (15.2 x 12.7 cm)
All 06D 6-cyl. and 06CC 16 to 37 Cfm (6" x 8") (15.2 x 20.3 cm)
All 06E 4 and 6-cyl. compressors and
06CC 50 to 99 Cfm (7" x 7") (17.8 x 17.8 cm)
All 06D and 06CC 16 to 41 Cfm
All 06E and 06CC 50 to 99 Cfm #4 to #8 Wire Size
All 06E and 06CC 50 to 99 Cfm #1 to #4 Wire Size
208/230/460 (triple voltage)
208/230/460/575 (distinct voltage)
96
COMPRESSOR USAGE AND SIZE
The 06DA660095 package
COMPRESSOR USAGE
USAGE