Installing The Router - Cisco 800M series Installation Manual

Installing the Router

This chapter describes the equipment and the procedures for successfully installing the Cisco 800M
Series ISR, and contains the following sections:
Equipment, Tools, and Connections, page 2-2
•
• Installing the Router, page 2-3
Note For compliance and safety information, see
800 Series Routers.
Read the installation instructions before connecting the system to the power source. Statement 1004
Warning
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
Warning
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
No user-serviceable parts inside. Do not open. Statement 1073
Warning
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Statement 1040
Warning Read the wall-mounting instructions carefully before beginning installation. Failure to use the
correct hardware or to follow the correct procedures could result in a hazardous situation to people
and damage to the system. Statement 378
C H A P T E R
Regulatory Compliance and Safety Information for Cisco
Cisco 800M Series Integrated Services Router Hardware Installation Guide
2
2-1