Cisco 800M series Installation Manual page 27

Chapter 2 Installing the Router
Maintain 1RU gap (both above and below) while stacking the units.
Note
To mount the router on a rack, follow these steps:
Step 1 Attach the two brackets to the chassis using the three screws provided for each bracket. The brackets can
be attached to the router in three ways based on the needs of the user:
Router LEDs facing the user as shown in
•
• I/O side facing the user as shown in
• Router I/O facing the user - Reverse the rack mount brackets to have offset rack mount option as
shown in
Figure 2-5
Figure 2-6
Figure 2-7.
Attaching the Brackets (LEDs facing the user)
1 LEDs facing the user
Attaching the Brackets(I/O side facing the user)
1
Input/ Output side
Cisco 800M Series Integrated Services Router Hardware Installation Guide
Figure 2-5.
Figure 2-6.
1
1
2-7