Wall Mount - VeriFone MX 900 Series Installation Manual

6

Wall Mount

The MX 900 Series terminal can be mounted on a wall. To wall mount the MX 900
Series terminal:
1. Create a template of the three key hole slots on the bottom of the
2. Locate a wall stud to base center placement of the MX 900 Series
3. Mark the hole placement on the desired wall location.
4. Prepare holes for screw placement. For mounting into drywall use 1/8"
5. Insert screws into prepared holes, leaving approximately 6.35mm (1/4")
6. Align and seat screws in the key hole slots.
7. Slide the MX 900 Series terminal down until the unit seats securely.
MX 900 Series terminal.
terminal unit.
Hollow Wall Anchors. Other stud mountings use #6 trim screws. After
installation apply 30 pounds force downward to ensure proper mounting.
a. Create a small hole in which to screw in self-tapping wood screws, or
b. Insert molly screws into prepared holes in sheet rock wall.
of the screw above the level of the wall.
Note:
Adjust the screw depth till the unit is firmly mounted.
MX 900 Series Installation Guide
Key Hole Slots
Mounting Holes
March 1, 2012