Maintenance; Owner's/Operator's Manual And Tool Kit; Removing And Installing The Engine Covers - Yamaha 212X 2016 Owner's/Operator's Manual

Maintenance

Maintenance
WARNING
Be sure to turn off the engines when you
perform maintenance unless otherwise
specified. If you are not familiar with ma-
chine servicing, this work should be done
by a Yamaha Boat Dealer or other qualified
mechanic.
Maintenance, replacement, or repair of the
emission control devices and system may be
performed by any marine SI engine repair es-
tablishment or individual. Warranty repair,
however, must be performed at an authorized
Yamaha Boat Dealer. A service manual is
available for purchase through a Yamaha
Boat Dealer for owners who have the me-
chanical skills, tools, and other equipment
necessary to perform maintenance not cov-
ered by this owner's/operator's manual.
Owner's/operator's manual and tool
kit
It is advisable to always carry the owner's/op-
erator's manual and tool kit with you whenev-
er you use the boat.
To protect these materials from water dam-
age, it would be a good idea to put them in a
waterproof bag. If your owner's/operator's
manual is damaged, order a replacement
from a Yamaha Boat Dealer.
The service information included in this man-
ual is intended to provide you, the owner, with
the necessary information for completing your
own preventive maintenance and minor re-
pairs. The tools provided in the owner's tool kit
are sufficient for this purpose, except that a
torque wrench is also necessary for tightening
nuts and bolts properly.
124
1 Tool bag
2 Screwdriver
3 Garden hose adapter
4 10/12 mm box wrench
5 Pliers
6 10/12 mm open-end wrench
Removing and installing the engine
covers
The engine cover of each engine is remov-
able.
To remove the engine cover:
(1) Open the engine hood. (See page 60.)
(2) Remove the engine cover screws.
1
1 Engine cover screw