Yamaha 212X 2016 Owner's/Operator's Manual page 93

(1) Remove the floor mat.
2
1 Fuel tank compartment cover
2 Lock handle
3 Floor mat
(2) Pull the lock handles up, and then turn
them.
(3) Remove the fuel tank compartment cover
to check the fuel tank compartment for
bilge water.
(4) Open the engine hood.
(5) Remove the fuel tank compartment drain
plug to drain the water.
1 Fuel tank compartment drain plug
(6) If the boat was operated in salt water,
wash down the compartment with fresh
water.
(7) Securely install the drain plug in its origi-
nal position.
(8) Close the engine hood.
Operation and handling requirements
3
1
BOW
(9) Install the fuel tank compartment cover.
(10) Turn the lock handles, and make sure
that the fuel tank compartment cover is
securely closed.
1
(11) Push the lock handles down.
(12) Install the floor mat in its original position.
Draining the bilge water from the engine
compartment
If there is fuel or a fuel/water mixture in the en-
gine compartment, wipe it up immediately
with dry rags. WARNING! This indicates a
fuel leak. Do not operate the boat until the
source of the fuel leak is found and cor-
rected. Gasoline and its vapors are highly
flammable and explosive.
(1) Open the engine hood.
(2) Remove the engine compartment drain
plug to drain the water.
1 Engine compartment drain plug
(3) If the boat was operated in salt water,
wash down the compartment with fresh
water.
(4) Securely install the drain plug in its origi-
nal position.
(5) Close the engine hood.
BOW
1
87