Warnings; Warning Definition Table; Engine Overheat Warning System - Yamaha 212X 2016 Owner's/Operator's Manual

Instrument operation

Warnings

Warnings are audible and visual indicators of
a fault condition. A warning will be displayed
on the LCD. Warnings on the LCD can be ac-
knowledged by pressing the M button. Once
acknowledged, the message will disappear
and be replaced by an "
verse video in a corner of the display.
Check Engine
AL

Warning definition table

The warnings that are displayed on the LCD
are listed in the following table.
LCD
Engine Over Temp Engine overheat
Low Oil Press
Check Engine
Batt Voltage
Aux Voltage*
Low Fuel Level
* For models equipped with auxiliary battery
only
46
" flashing in re-
WARNING
warning system
Engine oil pressure
low warning
Check engine warn-
ing
Low/High battery
voltage warning
Low/High battery
voltage warning
Low fuel level warn-
ing

Engine overheat warning system

This model is equipped with an engine over-
heat warning system. If the engines start to
overheat, " Engine Over Temp" will appear
on the LCD of the multi-function tachometer
for the affected engine. The buzzer also be-
gins to sound. The engine speed is automati-
cally limited to help prevent damage. If this
occurs, immediately reduce the engine
speed, return to shore or maneuver to a safe
location, and check for water discharge at the
cooling water pilot outlets.
There are cooling water pilot outlets on the
starboard side of the hull. Check that water
comes out of the outlets while the engines are
running, particularly while applying throttle. If
you do not see any water at the outlets, cool-
ing water may not be circulating in the en-
gines.
1 Cooling water pilot outlet (starboard engine)
2 Cooling water pilot outlet (port engine)
TIP:
If the cooling water passages in the engines
are dry, it will take about 20 seconds for water
to reach the pilot outlets after starting.
1 2