Yamaha 212X 2016 Owner's/Operator's Manual page 58

Instrument operation
the buzzer sounds, the no-wake mode is
activated.
1 Plus side " "
No Wake Mode
TIP:
The no-wake mode can be set to 3 engine
speeds. To adjust the engine speed while the
no-wake mode is activated, push the plus side
or minus side of the no-wake mode/cruise as-
sist switch.
To deactivate the no-wake mode:
Perform one of the following operations.
52
Push the minus side of the no-wake
●
mode/cruise assist switch until the LCD re-
turns to the normal display.
1
1 Minus side " "
Push the remote control levers forward to
●
open the throttle.
Cruise assist
The cruise assist feature is for steady engine
speed operation when the boat is traveling
above no-wake speeds. The cruise assist is
available for use whenever the engines are
running above
7000 rpm.
To activate the cruise assist:
(1) Push the remote control levers forward to
open the throttle until the desired engine
speed is reached and both engines are
operating at the same engine speed.
(2) Push the plus side or minus side of the
no-wake mode/cruise assist switch.
Once "Cruise" is displayed in the LCD of
3000 rpm and
1
below