Installing The Mac Settings Panel - Tascam us-20x20 Owner's Manual

Installing the Mac Settings Panel

NOTE
• Install the Mac Settings Panel on the computer before
connecting the unit to it with the USB cable.
• Depending on the Gatekeeper setting, a warning message
might appear during installation. For information about
Gatekeeper, see "Note about Gatekeeper" in "3 – Instal-
lation" of the Reference Manual.
Mac Settings Panel installation procedures
8
1. Download the latest Mac Settings Panel for the operating
system you are using from the TEAC Global Site (http://
teac-global.com/) and save it on the computer to be used
with the unit.
2. Double-click "US-20x20_Installer.dmg", which is the saved
disk image file for the Mac Settings Panel, and double-click
"US-20x20.pkg" inside the folder that opens.
NOTE
Depending on the computer's settings, the downloaded zip
file might not have opened automatically. In this case, open
the zip file first and then double-click the disk image file.
3. When the installer starts, click the "Continue" button.
4. Next, select the desired language and click the "Continue"
button.
5. Click the "Read License" button and check the contents
of the Software License Agreement. If you agree to the
contents, click "Agree".
Then, click the "Next" button.
6. Next, click the "Install" button to start installation.
7. The following screen appears when installation has
completed.
Click the "Close" button.
The Mac Settings Panel will launch.
9
TASCAM US-20x20