Tascam US-2x2 Owner's Manual
Hide thumbs
Also See for US-2x2:
- Owner's manual (88 pages) ,
- Reference manual (26 pages) ,
- Owner's manual (50 pages)
Subscribe to Our Youtube Channel
Related Manuals for Tascam US-2x2
Summary of Contents for Tascam US-2x2
- Page 1 D01236100E US-2x2 US-4x4 USB Audio/MIDI Interface OWNER'S MANUAL ENGLISH MODE D’EMPLOI FRANÇAIS MANUAL DEL USUARIO ESPAÑOL BEDIENUNGSANLEITUNG DEUTSCH MANUALE DI ISTRUZIONI ITALIANO 取扱説明書 日本語...
- Page 2 • TASCAM is a trademark of TEAC CORPORATION, registered in the U.S. and other countries. http://tascam.jp/ • Microsoft, Windows, Windows 7, Windows 〒206-8530 東京都多摩市落合1-47 8 and Windows Media are either registered trademarks or trademarks of Microsoft TEAC AMERICA, INC. Corporation in the United States and/or other http://tascam.com/...
-
Page 3: Important Safety Instructions
14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has TASCAM US-2x2/US-4x4... -
Page 4: Table Of Contents
Apple iOS devices ...............15 (d) The crossed out wheeled dust bin Supported audio drivers ............15 symbol indicates that electrical and General................... 15 electronic equipment must be collected Dimensional drawings ............. 16 and disposed of separately from household waste. TASCAM US-2x2/US-4x4... -
Page 5: Introduction
Do not install this unit in the following types Introduction of locations. Doing so could make the sound quality worse or cause malfunction. Thank you for your purchase of the TASCAM US-2x2/ Locations with frequent vibrations US-4x4 USB Audio/MIDI Interface. Near windows or other places exposed to... -
Page 6: Cleaning The Unit
The SIG indicators light green when signals (of These input jacks are XLR/TRS combo jacks on at least −32 dBFS) are input through the IN1/IN2 the US-2x2 and separate XLR and standard TRS jacks (and US-4x4 IN3/IN4 jacks). jacks on the US-4x4. -
Page 7: Rear Panel
TEAC Global dedicated software. This will also install the “TASCAM Site (http://teac-global.com/). US-2x2 & US-4x4 Software Mixer” app that has • Installing the dedicated software on a Windows additional functions for the US-2x2 and US-4x4. - Page 8 Then, click the “Next” button. is still not recognized after a while, open the software installation screen from the notification area at the bottom right of the computer display, and click “Skip obtaining driver software from Windows Update” to stop the search. TASCAM US-2x2/US-4x4...
-
Page 9: Installing The Mac Dedicated Software
“Program” item. If “View by:” is set to “Large icons” or “Small icons”, click “Programs and Features”. Select and double-click TASCAM US-2x2 & US-4x4 Driver and TASCAM US-2x2 & US-4x4 Software Click the “Read License” button and check the Mixer in the list. -
Page 10: Uninstalling The Mac Dedicated Software
2) to request repair. software US-2x2 Delete “US-2x2_US-4x4_Settings Panel” from the Normally, when a US-2x2 is connected to a computer, Applications folder to complete uninstallation. it will operate using USB bus power, so a separate power supply is not necessary. However, when... -
Page 11: Making Various Settings
8 Windows Options Monitor: The signals input from all the input From “All Apps” (All Programs), select “TASCAM US-2x2 connectors and the signals sent from the & US-4x4 Software Mixer” under TASCAM. computer by USB are mixed by the mixer and 8 Mac OS output. -
Page 12: Connecting With Ios Devices
Connecting with iOS devices Operating environment US-2x2: You will need a Lightning to USB Camera • Computer manufacturer Adapter and an AC adapter (sold separately). - Page 13 Apple menu. of the “Advanced” tab of the “System Open “Sound”. Properties” window. On the Output tab, select “US-2x2” or “US-4x4”. In the “Visual Effects” tab of the “Performance Options” window, select “Adjust for best After completing the setting, restart the performance”.
-
Page 14: Specifications
Connector: 6.3mm (1/4") standard stereo jack US-2x2: IN 1-2 Maximum output US-4x4: IN 1-4 US-2x2: 18 mW + 18 mW or higher (THD+N Connectors: XLR-3-31 equivalent (1: GND, 2: HOT, 0.1% or less, into 32 Ω load) 3: COLD) US-4x4: 45 mW + 45 mW or higher (THD+N Input impedance: 2.2 kΩ... -
Page 15: Computer System Requirements
CPU/processor speed 120200-Z, DC12V) 2 GHz or faster dual core processor (x86) *When using with an iOS device, a separate AC Memory adapter designed for use with this unit (TASCAM 2 GB or more PS-P520, DC5V) is necessary. CAUTION Power consumption Operation of this unit was confirmed using US-2x2: 2.5 W... -
Page 16: Dimensional Drawings
Dimensional drawings US-4x4 US-2x2 • Illustrations in this manual might differ in part from the actual product. • Specifications and external appearance might be changed without notification to improve the product. TASCAM US-2x2/US-4x4... - Page 17 买本产品的销售店进行联系。 establecimiento donde adquirió el aparato. of shipping charges is discussed in the next section of this warranty. If you require repair services for your TASCAM <日本> equipment, please contact the dealer where HOW YOU CAN GET WARRANTY SERVICE 無料修理規定（持ち込み修理）...
- Page 18 WARRANTY / 保証書 Model / 型名 Owner’s name / お名前 US-2x2/US-4x4 Serial No. / 機番 Address / ご住所 Date of purchase / お買い上げ日 Dealer’s name / 販売店 Dealer’s address / 住所 http://teac-global.com/ Memo / 修理メモ お客様にご記入いただいた保証書の控えは、保証 期間内のサービス活動およびその後の安全点検活 〒206-8530 東京都多摩市落合1-47 動のために記載内容を利用させていただく場合が ティアック修理センター...
- Page 19 D01236020F US-2x2 US-4x4 USB Audio/MIDI Interface REFERENCE MANUAL Before connecting this unit to a computer, you must download and install dedicated software on the computer.
- Page 20 Connecting with iOS devices ..........12 6 – Using the Settings Panel ......13 Opening the Settings Panel ..........13 Windows ................13 Mac ..................13 Settings Panel overview ............13 7 – Application Guide ........15 DAW software ................15 Bundled DAW software ..........15 Other DAW software ............15 TASCAM US-2x2/US-4x4...
-
Page 21: Introduction
Failure to follow these instructions could result in injury, damage to equipment or lost recording data, for example. CAUTION When using a US-2x2 that is connected to a computer, it will operate using USB bus power. Using the TEAC Global Site... -
Page 22: Names And Functions Of Parts
USB indicator IN1/IN2 (BALANCED/UNBALANCED) jacks This lights when the USB connection is working. These input jacks are XLR/TRS combo jacks on the US-2x2 and separate XLR and standard TRS jacks on the US-4x4. LINE OUT knob Use the MIC/LINE INST switches on the front of the unit to Use to adjust the output level of the LINE OUT 1-2 jacks. -
Page 23: Rear Panel
(Supports USB 2.0.) CAUTION • When using a US-2x2 that is connected to a computer, it will receive power from the computer's USB port. Depending on the computer, the USB port might not be able to supply enough power to operate the unit. -
Page 24: Installation
7 or later Supported audio drivers Windows: ASIO2.0, WDM, MIDI Mac: Core Audio, Core MIDI 6. Read the contents of the License Agreement, and select “I accept the agreement” if you agree to the terms. Then, click the “Next” button. TASCAM US-2x2/US-4x4... -
Page 25: Installing The Mac Dedicated Software
If the unit is still not recognized after a while, open the software installation screen from the notification area at the bottom right of the computer display, and click “Skip obtaining driver software from Windows Update” to stop the search. TASCAM US-2x2/US-4x4... -
Page 26: Working With Gatekeeper
When the Gatekeeper setting is not “Allow applications downloaded from: the Mac App Store” ‘“US-2x2_US-4x4 Installer.dmg” is an application downloaded from the Internet. Are you sure you want to open it?” might appear as a security warning message. In this case, click the “Open” button. TASCAM US-2x2/US-4x4... -
Page 27: Uninstalling The Dedicated Software
If “View by:” is set to “Large icons” or “Small icons”, click “Programs and Features”. 3. Select and double-click “TASCAM US-2x2 & US-4x4 Driver” and “TASCAM US-2x2 & US-4x4 Software Mixer” in the list. 4. Then, follow the instructions that appear on the screen. Uninstalling the Mac dedicated software Delete “US-2x2_US-4x4_Settings Panel”... -
Page 28: Preparation
US-2x2 Do not use the adapter if there is anything abnormal about Normally, when a US-2x2 is connected to a computer, it will the plug after changing it. Use when the plug is abnormal operate using USB bus power, so a separate power supply is could cause fire or electric shock. -
Page 29: Connections
(standby). • The phantom power switch changes the setting for both US-2x2 input channels (all four US-4x4 input channels) simultaneously. Do not turn phantom power +48V when connecting a mic that does not require phantom power. -
Page 30: Electronic Instruments And Other Audio
To connect an analog record player to this USB Camera Adapter (sold separately). unit, a phono amp and equalizer (or an audio amplifier that has DC5V TASCAM PS-P520 AC adapter (sold separately). phono input jacks) must be connected between them. Monitor speakers... -
Page 31: Using The Settings Panel
This is the name of the connected unit. • Using the Finder, open the Applications folder and click (“No Device” is shown when no “TASCAM US-2x2 & US-4x4 Settings Panel” to open the device is connected.) Settings Panel. This is the firmware version used Firmware Ver. - Page 32 (above −60 dBFS) has been detected for 30 minutes, the unit will turn itself off (start standby) automat- ically. Options “ON” (default) : The automatic power saving function is on. “OFF” : The automatic power saving function is off. TASCAM US-2x2/US-4x4...
-
Page 33: Application Guide
If the Control Panel display method is set to Icon, a Sound manual. icon will be shown. 3. On the “Playback” page, right-click “US-2x2 (or US-4x4)” or Driver settings for specific purposes “US-2x2 & US-4x4 Mixing Driver”, and click “Set as Default Device”... -
Page 34: Mac Os X And Itunes
“Audio MIDI Setup”. Then open the “Audio Devices” window. 2. Click “TASCAM US-2x2 Audio Device” (or “TASCAM US-4x4 Audio Device”) to select it and right-click or control-click it. Then, click “Use this device for sound output” in the pop-up menu. -
Page 35: Using The Software Mixer (For Windows)
Items other than through can also be set Be careful not to open “US-2x2 & US-4x4 Settings Panel” in using the Settings Panel. the same folder by mistake. If the Settings Panel is open, close it before opening the Software Mixer. -
Page 36: Detail Screen Settings
Setting the playback/recording device When using the Software Mixer, set the default device to “US-2x2 & US-4x4 Mixing Driver” on the Recording and Playback tabs. See “7 – Application Guide” on page 15 for information about setting the playback/recording device. -
Page 37: Standalone Mode
This function is convenient when you want to practice an instrument without recording, for example. However, when using US-2x2 in standalone mode, a TASCAM PS-P520 DC5V AC adapter (sold separately), which is designed for use with this unit, is necessary. -
Page 38: 10 - Midi Implementation Chart
— All notes off Other Thru — — Active sense — — Reset Notes –: YES Mode 1: OMNI ON, POLY Mode 2: OMNI ON, MONO Mode 3: OMNI OFF, POLY Mode 4: OMNI OFF, MONO —: NO TASCAM US-2x2/US-4x4... -
Page 39: 11 - Troubleshooting
2. Open “Sound”. The operating system being used might not be compatible 3. On the “Output” tab, select “US-2x2” or “US-4x4”. with the software that you are trying to install. Check the compatible operating system of the software you are trying After completing the setting, restart the computer and to install again. - Page 40 Sound breaks up or there is noise. Support for Bundled DAW Software The processing load on the computer causes sound to break up TASCAM does not provide end-user support for the bundled and noise to occur. DAW Software. Please check the Help menu of the installed software to find where this support is available.
-
Page 41: 12 - Specifications
: 57 dB Distortion 0.003% or less ( MIC/LINE input to LINE OUT, 1kHz sine wave, at nominal input level and maximum output level, JEITA) Crosstalk 95 dB or more ( MIC/LINE input to LINE OUT, 1 kHz, JEITA) TASCAM US-2x2/US-4x4... -
Page 42: Computer System Requirements
Windows 7 64-bit SP1 or later External dimensions (Windows 8, Windows Vista and Windows XP are not US-2x2 : 186 × 65 × 160 mm (width × height × depth) supported) US-4x4 : 296 × 65 × 160 mm (width × height × depth) - Page 43 TEAC CORPORATION http://tascam.jp/ Phone: +81-42-356-9143 1-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan TEAC AMERICA, INC. http://tascam.com/ Phone: +1-323-726-0303 1834 Gage Road, Montebello, California 90640 USA TEAC MEXICO, S.A. de C.V. http://teacmexico.net/ Phone: +52-55-5010-6000 Río Churubusco 364, Colonia Del Carmen, Delegación Coyoacán, CP 04100, México DF, México TEAC UK Ltd.
Need help?
Do you have a question about the US-2x2 and is the answer not in the manual?
Questions and answers