Making Computer Settings; Making Settings On The Mixer Screen - Tascam us-20x20 Owner's Manual

Making computer settings

NOTE
In order to enable the computer to handle digital audio signals smoothly, other loads on the computer should be minimized as much
as possible We recommend that you quit unneeded applications before use.

Making settings on the MIXER screen

Launch the Settings Panel software.
Windows
8
From "All Apps" (All Programs), select "US-20x20 Settings Panel" under TASCAM.
Mac OS X
8
Select "US-20x20 Settings Panel" from Applications and launch it to open the Settings Panel on the computer display.
Click the MIXER tab on the Settings Panel to open the MIXER page as shown below.
NOTE
When the unit is in MIC PRE mode, clicking the MIXER tab
will not open the MIXER page.
EQUALIZER
1
Equalizer settings are shown for the channel selected using
its Select button ( ).
5
COMPRESSOR
2
Compressor settings are shown for the channel selected
using its Select button ( 5
Mode
3
This shows the operation mode of the unit set using the
MODE button on its front panel.
REVERB
4
This shows the reverb settings.
Select buttons
5
Activate one of these buttons to show the equalizer and
compressor settings for that channel in 1 and 2.
Windows Settings Panel MIXER page
).
PHASE buttons
6
Click a PHASE button to reverse the phase of that channel.
Lit buttons show the channels that have this function
activated.
EQ buttons
7
Click an EQ button to activate the equalizer for that channel.
Lit buttons show the channels that have this function
activated.
COMP buttons
8
Click a COMP button to activate the compressor for that
channel. Lit buttons show the channels that have this
function activated.
9 Effect AUX selection buttons
0 AUX 1–4 knobs and indicators
SOLO buttons
q
MUTE buttons
w
Pan sliders
e
11
TASCAM US-20x20