Table of Contents
Advertisement
Master Output Packetization Time (Master Mode)
The size of the audio packets sent by the Master to the Slaves. The
default of 20ms is recommended, unless a different value is
specifically required for compatibility with other devices.
Zone Definition
The "Expanded" Slave or Master zones can be enabled/disabled in
Basic Settings > Multicast. Default IP addresses and ports may be
revised for any given zone in the table.
Ensure that the Address and Port settings are the same for all master
and slave devices.
Page Tone and Page Volume
Master Mode: By default, the same tone can be set for all Slave
zones in the Basic Settings > Features tab. Unique paging tones may
be revised for any given Slave zone in the table above.
Slave Mode: When an Algo device is the multicast Master, a page
tone will play on the Slave device, so it is recommended to set the
Slave tone to "None". If a page is received from a non-Algo device
that doesn't send a tone, a tone can be inserted on the Slaves
(above) each time they detect page audio starting, allowing them to
play a tone.
By default, the same page volume can be set for all Slave zones in
the Basic Settings > Features tab. Unique page volumes may be
revised on a per-zone basis in the table above. For instance,
emergency pages can be louder on certain Slave speakers.
Document 90-00079
2016-12-08
Page 61
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8186 SIP Horn Speaker
(604) 454-3792
support@algosolutions.com
Hide quick links:
Advertisement
Table of Contents
