Multicast Page Zones - Algo 8186 Installation/Configuration Manual

Multicast Page Zones

The 8186 SIP Horn Speaker supports nine "basic" multicast zones.
zones are defined by the multicast IP addresses.
Somewhat arbitrarily, these zones are defined below but may be
used in other ways. The important consideration is that there is a
priority hierarchy – streaming activity on a zone higher on the list will
be treated as a higher priority than a zone lower on the list – with
music being the lowest priority.
There are two options for Paging to multiple zones: "DTMF Selectable
Mode" or via multiple page extensions.
The "DTMF Selectable Mode" offers a dynamic page zone selection
and requires only the master device to have a registered SIP
Extension. To page, dial the SIP extension of the master device and
then dial the desired DTMF page zone (e.g. 1, 2, etc.) on the keypad.
Note: DTMF codes for zones 10 and higher start with an "*".
Document 90-00079
2016-12-08
Page 16
 Priority
 All Call
 Zone 1
 Zone 2
 Zone 3
 Zone 4
 Zone 5
 Zone 6
 Music
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8186 SIP Horn Speaker
(604) 454-3792
support@algosolutions.com