Citizen CMP-20 series Program Manual page 17

Print Line Characteristics that are reset at the end of each print method or by a
sequence.
"Normal"
Name
Bold
Underline
Italic
Alternate color (Red)
Reverse video
Shading
Single high & wide
Double wide
Double high
Double high & wide
Scale horizontally
Scale vertically
Center
Right justify
Normal
Data
ESC |bC Prints in bold or double-strike.
ESC |#uC Prints with underline. The character '#' is
replaced by an ASCII decimal string telling
the width of the underline in printer dot units.
If '#' is omitted, then a printer-specific
default width is used.
ESC |iC Prints in italics.
ESC |rC Prints in alternate color.
ESC |rvC Prints in a reverse video format.
ESC |#sC Prints in a shaded manner. The character
'#' is replaced by an ASCII decimal string
telling the percentage shading desired. If
'#' is omitted, then a printer-specific default
level of shading is used.
ESC |1C Prints normal size.
ESC |2C Prints double-wide characters.
ESC |3C Prints double-high characters.
ESC |4C Prints double-high/double-wide characters.
ESC |#hC Prints with the width scaled '#' times the
normal size, where '#' is replaced by an
ASCII decimal string.
ESC |#vC Prints with the height scaled '#' times the
normal size, where '#' is replaced by an
ASCII decimal string.
ESC |cA Aligns following text in the center.
ESC |rA Aligns following text at the right.
ESC |N Restores printer characteristics to normal
condition.
- 17 -
Remarks