Connecting The Camera - GeoVision GV-BX1500-1F Quick Start Manual

3.4 Connecting the Camera

1. Connect power using one of the following methods:

Plug the power adapter to the 12V terminal block. The power
adapter is an optional device. For detail, see Options in the
GV-IPCAM Hardware Manual for Target Box Camera on the
Software DVD.

Use the Power over Ethernet (PoE) function and the power will be
provided over the network cable. The power and status LEDs shall
turn on (green).
2. Use a standard network cable to connect the camera to your network.
3. You are ready to access the live view, adjust the image clarity and
configure the basics. See 24. Accessing the Camera in the Quick Start
Guide.
18