D-Link DIR-880L User Manual page 75

Section 4 - Coniguration
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your Internet Service Provider (ISP) uses a PPTP connection. Your ISP will provide you with a
username and password.
Enter the PPTP server IP address provided by your ISP.
PPTP Server IP
Address:
Enter the username provided by your ISP.
Username:
Enter the password provided by your ISP.
Password:
Select either Always-on, On-Demand, or Manual.
Reconnect
Mode:
Enter a maximum idle time during which the Internet connection
Maximum Idle
is maintained during inactivity. To disable this feature, enable Auto-
Time:
reconnect.
Select Static IP if your ISP assigned you the IP address, subnet mask,
Address Mode:
gateway, and DNS server addresses. In most cases, select Dynamic IP.
Enter the IP address provided by your ISP (Static IP only).
PPTP IP
Address:
Enter the subnet mask provided by your ISP (Static IP only).
PPTP Subnet
Mask:
Enter the gateway IP address provided by your ISP (Static IP only).
PPTP Gateway
IP Address:
Enter the primary DNS server IP address assigned by your ISP.
Primary DNS
Server:
D-Link DIR-880L User Manual
PPTP
71