Admin - D-Link DIR-880L User Manual

Section 4 - Coniguration
This page will allow you to change the administrator (Admin) password and enable
remote management.
In the Management menu on the bar on the top of the page, click Admin.
Enter a new password for the administrator account. You will need to
Password:
enter this password whenever you conigure the router using a web
browser.
Enables a challenge-response test to require users to type letters or
Enable
numbers from a distorted image displayed on the screen to prevent
Graphical
online hackers and unauthorized users from gaining access to your
Authentication
router's network settings.
(CAPTCHA):
Check to enable HTTPS to connect to the router securely. This means
Enable HTTPS
to connect to the router, you must enter https://192.168.0.1 instead
Server:
of http://192.168.0.1.
Remote management allows the DIR-880L to be conigured from the
Enable Remote
Internet by a web browser. A password is still required to access the web
Management:
management interface.
The port number used to access the DIR-880L is used in the URL.
Remote Admin
Example: http://x.x.x.x:8080 where x.x.x.x is the Internet IP address
Port:
of the DIR-880L and 8080 is the port used for the web management
interface. If you enable HTTPS Server, you must enter https:// as part
of the URL to access the router remotely.
Click Save when you are done.
To load, save, or reset settings, or reboot the router, click System and refer to page 119.
D-Link DIR-880L User Manual

Admin

118