Network - D-Link DIR-880L User Manual

Section 4 - Coniguration
This section will allow you to change the local network settings of the router and to
conigure the DHCP settings. In the Settings menu on the bar on the top of the page,
click Network. Click Advanced Settings... to expand the list and see all of the options.
Enter the IP address of the router. The default IP address is
LAN IP Address:
192.168.0.1.
If you change the IP address, once you click Save, you will need
to enter the new IP address in your browser to get back into the
coniguration utility.
Enter the subnet mask of the router. The default subnet mask is
Subnet Mask:
255.255.255.0.
The default address to access the router's configuration is
Management
http://dlinkrouter.local. Here, you can replace dlinkrouter with a
Link:
name of your choice.
Enter the domain name (optional).
Local Domain
Name:
Disable to transfer the DNS server information from your ISP to your
Enable DNS
computers. If enabled, your computers will use the router for a DNS
Relay:
server.
Enable or disable the DHCP server.
Status:
Enter the starting and ending IP addresses for the DHCP server's IP
DHCP IP
assignment.
Address Range:
Note: If you statically (manually) assign IP addresses to your computers
or devices, make sure the IP addresses are outside of this range or you
may have an IP conlict.
D-Link DIR-880L User Manual

Network

98