Fusing Entrance Guide Shift Mechanism - Ricoh G147 Service Manual

6.13.4 FUSING ENTRANCE GUIDE SHIFT MECHANISM

The entrance guide [A] has two holes on each side to adjust for paper thickness to prevent
creasing. Normally, the left screw hole [C] on each side is used.
For thin paper, use screw holes [B] to move the entrance guide to the left. This setting allows
more direct access to the gap between the hot and pressure rollers, and prevents thin paper
from buckling against the hot roller which can cause blurring at the leading edge of the copy.
SM 6-59 G147