Configuring A Pki Entity Identifier - Huawei AR1200-S Configuration Manual

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security
Pre-configuration Tasks
None
Data Preparation
To configure a PKI entity, you need the following data.
No.
1
2

12.3.2 Configuring a PKI Entity Identifier

You can configure a common name, a fully qualified domain name (FQDN), or both to uniquely
identify a PKI entity.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
pki entity entity-name
The PKI entity view is displayed.
By default, no PKI entity is configured on the AR1200-S.
Step 3 Run the following commands to configure the PKI entity identifiers:
l Run the common-name common-name command to configure the common name for the
l Run the fqdn fqdn-name command to configure the FQDN for the PKI entity.
Either common-name or fqdn-name can identify a PKI entity. To identify a PKI entity, specify
common-name or fqdn-name.
----End
12.3.3 (Optional) Configuring PKI Entity Attributes
In addition to configuring a common name or an FQDN for a PKI entity, you can configure the
country code, state name or province name, and department name for the PKI entity to identify
this PKI entity.
Issue 02 (2012-03-30)
PKI entity.
By default, no PKI entity name is configured on the AR1200-S.
By default, no FQDN is configured on the AR1200-S.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Data
PKI entity's common name, fully qualified domain name
(FQDN), or both (each of the two uniquely identifies a PKI
entity)
(Optional) PKI entity's country code, state name,
organization name, department name, and IP address
12 PKI Configuration
238