Huawei AR1200-S Configuration Manual page 245

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security
# Set the maximum number of connection attempts to 5.
[Router-cwmp] cwmp cpe connect retry 5
# Set the close-wait timer of the Router to 100 seconds. If no data is transmitted within 100
seconds, the connection is torn down.
[Router-cwmp] cwmp cpe wait timeout 100
Step 7 Verify the configuration.
# Run the display current-configuration command. The command output shows that SSL has
been successfully configured for CWMP.
<Router> display current-configuration
...
cwmp
cwmp cpe inform interval enable
cwmp acs url https://www.acs.com:80/acs
cwmp acs username newacsname
cwmp acs password newacspsw
cwmp cpe username newcpename
cwmp cpe password newacspsw
cwmp cpe inform interval 1000
cwmp cpe connect retry 5
cwmp cpe wait timeout 100
cwmp cpe connect interface Ethernet 1/0/0
cwmp ssl-client ssl-policy sslclient
...
# Run the display cwmp configuration command. The command output shows that CWMP is
enabled, and the Router is configured to send Inform packets at intervals.
<Router> display cwmp configuration
CWMP is enabled
ACS URL:
ACS username:
ACS password:
Inform enable status:
Inform interval:
Inform time:
Wait timeout:
Reconnection times:
# Run the display cwmp status command. The command output shows that CWMP is enabled,
and the CWMP connection status is connected.
<Router> display cwmp status
CWMP is enabled
ACS URL:
Acs information is set by:
ACS username:
ACS password:
Connection status:
Time of last successful connection:
----End
Example
Configuration file of the Router
#
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
https://www.acs.com:80/acs
newacsname
newacspsw
enabled
1000s
2011-01-01T20:00:00
100s
5
https://www.acs.com:80/acs
user
newacsname
newacspsw
connected
2010-12-01T20:00:00
11 SSL Configuration
231