Huawei AR1200-S Configuration Manual page 27

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security
l
Issue 02 (2012-03-30)
By default, the default authentication scheme is used. The default authentication
scheme can be modified, but it cannot be deleted.
4. Run:
authentication-mode radius [ none ]
RADIUS authentication is configured.
By default, local authentication is used.
To use local authentication as the backup authentication method, run the
authentication-mode radius local command to configured local authentication.
NOTE
If multiple authentication modes are configured in an authentication scheme, authentication
modes are used according to the sequence in which they were configured. The AR1200-S uses
the authentication mode that was configured later only after the current authentication mode
fails. The AR1200-S stops the authentication if the user fails to pass the authentication.
5. (Optional) Run:
authentication-super { hwtacacs | super }
The authentication mode used to upgrade user levels is configured.
6. (Optional) Run:
quit
Return to the AAA view.
7. (Optional) Run:
domainname-parse-direction { left-to-right | right-to-left }
The direction in which the user name and domain name are parsed is configured.
Configuring an accounting scheme
1. Run:
system-view
The system view is displayed.
2. Run:
aaa
The AAA view is displayed.
3. Run:
accounting-scheme accounting-scheme-name
An accounting scheme is created and the accounting scheme view is displayed.
By default, the default accounting scheme is used. The default accounting scheme
can be modified, but it cannot be deleted.
4. Run:
accounting-mode radius
The accounting mode is set.
By default, non-accounting is used.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 AAA Configuration
*
[ none ]
13