Example For Using A Layer 2 Acl To Configure Traffic Classification - Huawei AR1200-S Configuration Manual

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security
ip address 129.39.10.8 255.255.255.0
zone external
#
return
10.6.3 Example for Using a Layer 2 ACL to Configure Traffic
Classification
A Layer 2 ACL is used to configure traffic classification to collect statistics on packets with the
specified source MAC address.
Networking Requirements
As shown in
to Ethernet0/0/0 of the Router through the switch. The Router is required to collect statistics on
packets with the source MAC address 0000-0000-0003.
Figure 10-3 Using a Layer 2 ACL to configure traffic classification
MAC: 0000-0000-0003
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
l
Issue 02 (2012-03-30)
Figure 10-3, the MAC address of PC1 is 0000-0000-0003 and PC1 is connected
PC1
Configure a Layer 2 ACL to match packets with the source MAC address 0000-0000-0003.
Configure traffic classification based on the Layer 2 ACL.
Configure a traffic behavior to collect statistics on the classified packets.
Configure a traffic policy and bind the traffic classifier and traffic behavior to the traffic
policy.
VLAN that the interface connecting the Router and the switch belong to: VLAN 20
Layer 2 ACL name: layer2
Traffic classifier name: c1
Traffic behavior name: b1
Traffic policy name: p1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Ethernet0/0/0
VLAN 20
Switch
10 ACL Configuration
Internet
Router
214