5. Operation
Automatic
R
Charging mode
Automatic
R
Charging mode
Automatic
Parallel mode
5.5
Remote Operation
The unit may also be controlled and monitored
remotely. In order to do this, you will need either the
CI1 control interface or the IA1 interface adapter. You
can obtain both from your dealer.
An "R" for "remote" will appear in the first line when
the unit is operating in remote mode.
You can lock or unlock the unit's software from a
remote location by pressing
auto and >> simultaneously. This will guarantee that
the unit cannot be started by a remote signal.
If you have locked the software, a padlock
in the first line of the display.
5.6
Parallel Operation of Multiple Units
You can harness up to five units in parallel if increased
output is needed. Use the optional CI1 control interface.
The manual that accompanies the control interface
describes the installation and parallel operation of
multiple units in detail.
Units running in parallel must all be in the same
operating mode. For example, all have to be running in
automatic mode. Be sure to press the same button on
each control panel (such as reset to restart or auto for
automatic mode).
Parallel mode will appear in the second line of the
display.
27
will appear