4. Installation
Automatic
Standby
Connect the control panel with the data line (included)
or with any commercially available network cable such
as a Cat. 5 patch cable.
Then insert the plug into the left socket on the unit
marked "Remote Control".
The display contains two lines with 16 characters
apiece.
The first line provides information as to the operating
mode selected:
Automatic
On
Off
It also provides information as to the language
selection. (See Chapter 4.7)
The second line provides information as to the
operating status:
Standby
Charging mode
Antifreeze mode
Shutting down
The second line also indicates operating parameters
such as charging current and such maintenance
parameters as "Please change fuel cartridge".
20