Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Convision CC-5351 DIR
Summary of Contents for Convision CC-5351 DIR
- Page 1 Manual CC-5351 DIR Date: January 2011 Convision Systems GmbH Manual CC 5351 DIR...
- Page 2 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
- Page 3 Warning The camera requires periodic inspection. Contact an authorised technician to carry out the inspection. Stop using your camera when you find it malfunctioning. If the camera emits smoke or is unusually hot for a long period, a fire may be caused. Do not install the camera on a surface that can not support it.
-
Page 4: Table Of Contents
Contents NOTICE Important Safeguard Precautions Features Names and Functions of Parts Dimension Installation Cable Connection Camera Operation Menu Settings Lens (selection) Shutter (conditions and speed control) White Balance control BACKLIGHT AGC (Auto Gain Control) DNR (Digital Noise Reduction) SENS UP (Low illiminance) Special EXIT Troubleshooting... -
Page 5: Notice
NOTICE Important Safeguard 1. Read Instructions Read all of the safety and operating instructions before using the product. 2. Retain Instructions Save these instructions for future reference. 3. Attachments / Accessories Do not use attachments or accessories unless recommended by the appliance manufacturer as they may cause hazards, damage product and void warranty. -
Page 6: Features
Features Horizontal Resolution 540 TV Lines Electronic IRIS Clear image quality has been achieved by The electronic IRIS function enables continuous employing a SONY CCD with 410,000 automatic control of the shutter between 1/60 ~ (effective) pixels, which provides a 1/120,000 seconds. -
Page 7: Names And Functions Of Parts
Names and Functions of Parts Lens: Vari-Focal Auto Iris Lens OSD PCB Manual CC 5351 DIR... -
Page 8: Dimension
● SETUP button: Used for the menu display. This button can be used to confirm settings after changing the value of the selected function or current conditions. ●UP & DOWN buttons: Used for selecting items by moving the cursor up or down on the menu screen. ●... -
Page 9: Installation
Installation 1. Dome Base Mounting - Open the dome cover by loosening the ring - Mount the base of camera to a sturdy surface using 2 screws and 2 premade holes on the base of the dome. 2. Power Connect & Monitor Impedance - DC12V/1000mA, AC24V/500mA regulated power supply. -
Page 10: Cable Connection
Cable Connection Camera Operation Menu Setup menu Lens (selection) Manual Shutter Manual White Balance control Manual Backlight MIDDLE HIGH AGC (Auto Gain control) MIDDLE HIGH DNR (Digital Noise Reduction) MIDDLE HIGH Sens-Up (Low Illumination) Auto Special Camera ID Colour SYNC Motion Detection Privacy Mirror... - Page 11 1. Please press the Setup button. Settings can now be made. The SETUP menu is displayed on the monitor. 2. Please select any function you wish to activate by using the UP and DOWN buttons. 3. When the LEFT or RIGHT button is pressed, available values and modes are displayed in order.
-
Page 12: Lens (Selection)
Lens (selection) This function is used to adjust the brightness of the screen. 1. When the SETUP menu is displayed on the screen, please position the arrow to point to LENS by using the UP and DOWN buttons. 2. Please select the type of the lens you wish to use by pressing the LEFT or RIGHT button. MANUAL: Manual lens selection DC/VIDEO: Auto Iris lens selection Note... -
Page 13: Shutter (Conditions And Speed Control)
Shutter (conditions and speed control) Auto or manual control can be selected. 1. When the SETUP menu is on the screen, please position the arrow to point to SHUTTER by using the UP and DOWN buttons. 2. Please select the shutter mode by pressing the LEFT or RIGHT button. FLK: Please select FLK mode when flickering occurs on the screen, due to an imbalance between illumination and frequency. -
Page 14: White Balance Control
White Balance control The screen colour can be adjusted by using the WHITE BALANCE function. 1. Please position the arrow to point to WHITE BAL on the SETUP menu by using the UP and DOWN buttons. 2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button. Please select on eof the 3 modes below. -
Page 15: Backlight
BACKLIGHT When there is a strong backlight behind the object, clear images of the background as well as the object can still be obtained by using the Backlight function. 1. Please position the arrow to point to BACKLIGHT in the SETUP menu by using the UP and DOWN buttons. -
Page 16: Agc (Auto Gain Control)
AGC (Auto Gain Control) 1. Please position the arrow to point to AGC on the SETUP menu using the UP and DOWN buttons. 2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button. As the level of gain increases, the screen gets brighter and the level of noise also increases. -
Page 17: Sens Up (Low Illiminance)
Note When AGC is turned off, DNR does not operate. SENS UP (Low illiminance) SENS UP helps maintain a bright, clear screen image by automatically detecting changes in the level of light in low light level conditions. 1. Please position the arrow to point to SENS UP on the SETUP menu by using the UP and DOWN button. -
Page 18: Special
Special 1. Please position the arrow to point to SPECIAL on the SETUP menu by using the UP and DOWN button. 2. Please select the mode you wish to operate by pressing the UP and DOWN button. CAMERA ID: If the ID is input, the camera ID appears on the monitor. 1) Please position the arrow to point to CAMERA ID by using the UP or DOWN button. - Page 19 • Select an ID from A, B~Y, Z, a, b ~ y, z, 0,1~8,9 by using the UP, DOWN, LEFT and RIGHT buttons. • Please lock in the letters by using the SETUP button. When the letter is locked in, the cursor moves to the next space.
- Page 20 Note • When the AGC is turned off, COLOR does not operate. • When an infrared light is used, there may be a problem with focusing. SYNC: Two SYNCHRONIZATION modes are available INTERNAL and EXTERNAL LINE- LOCK. In LINE-LOCK mode, it synchronizes the video signal between cameras without a synchronous generator.
- Page 21 • Please press the SETUP button. - OFF: MOTION DETECTION mode is cancelled. - ON: Any motion in the selected areas is observed. • Please select the area you wish to observe from the 4 areas in AREA SEL mode. •...
-
Page 22: Exit
SHARPNESS The outline of the video image becomes cleaner and more distinctive as the level of SHARPNESS increases. If the level goes up excessively, however, it may affect the video image and generate noise. • Please press the SETUP button. •... -
Page 23: Troubleshooting
Troubleshooting If there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from. Problems Troubleshooting Nothing appears on the screen. • Please check the power connection. • Please check the video signal line connection. •... -
Page 24: Specifications
Specifications Item NTSC Power Consumption Normal: 220mA, IR-LED On: 480mA (DC 12V only) Normal : 340mA, IR-LED On : 690mA (DC12V) Normal : 240mA, IR-LED On : 410mA (AC24V) Total Pixels 811(H) x 508(V) 795(H) x 596(V) Effective Pixels 768(H) x 494(V) 752(H) x 582(V) Size 1/3 inch interline transfer CCD...
Need help?
Do you have a question about the CC-5351 DIR and is the answer not in the manual?
Questions and answers