Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Convision CC-5307
Summary of Contents for Convision CC-5307
- Page 1 Manual CC-5307 Date: January 2011 Convision Systems GmbH Manual CC 5307...
- Page 2 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
- Page 3 Warning The camera requires periodic inspection. Contact an authorised technician to carry out the inspection. Stop using your camera when you find it malfunctioning. If the camera emits smoke or is unusually hot for a long period, a fire may be caused. Do not install the camera on a surface that can not support it.
-
Page 4: Table Of Contents
Contents NOTICE Important Safeguard Precautions Features Components Names and Functions of Parts Dimension Installation Cable Connection Installation (Adaptor Plate) How to Use the Camera On-Screen Display Menu Structure How to Set up the Functions Lens Exposure White Balance BACKLIGHT DNR (Digital Noise Reduction) Day &... -
Page 5: Notice
NOTICE Important Safeguard 1. Read Instructions Read all of the safety and operating instructions before using the product. 2. Retain Instructions Save these instructions for future reference. 3. Attachments / Accessories Do not use attachments or accessories unless recommended by the appliance manufacturer as they may cause hazards, damage product and void warranty. -
Page 6: Features
Features Ultra High Resolution have been improved resulting in a clear and By adopting a double-speed 960H sharp image even in low light. Sony CCD, the camera produces clear picture quality with a horizontal resolution of 650 TV Motion Detection lines for color and 800 TV lines for B/W. -
Page 7: Components
Components 1. Color Dome Camera 2. Screws 3. Wire for VBS-Extra 4. Instruction Guide Names and Functions of Parts Lens: Vari-Focal Auto Iris Lens Manual CC 5307... - Page 8 OSD PCB ● SETUP button: Used for the menu display. This button can be used to confirm settings after changing the value of the selected function or current conditions. ●UP & DOWN buttons: Used for selecting items by moving the cursor up or down on the menu screen. ●...
-
Page 9: Dimension
Dimension Installation Manual CC 5307... -
Page 10: Cable Connection
1. Dome Base Mounting - Open the dome cover by loosening 3 screws using special wrench provided. - Mount the base of camera to a sturdy using 4 screws (1.5 inch) and 4 premade holes on the base of the dome. 2. -
Page 11: Installation (Adaptor Plate)
Note • To control the camera by constructing an additional controller, use Pelco-D protocol. (Go Preset 95: Enters into OSD menu or Set key function) Installation (Adaptor Plate) * When installing on an adaptor plate bracket. 1. Place the adaptor plate bracket on a flat installation surface and fix it with the screws provided. 2. -
Page 12: How To Use The Camera
How to Use the Camera On-Screen Display Menu Structure Setup menu Lens Manual Exposure SHUTTER SENS-UP RETURN White Balance Manual OUTDOOR INDOOR Backlight WDR BLC Day/Night COLOR BW AUTO Image Adjustment FREEZ V-REV H-REV COLOR GAIN RESOLUTION SHARPNESS DEFECT COMP. RETURN Special CAMERA ID... - Page 13 1. Please press the Setup button. Settings can now be made. The SETUP menu is displayed on the monitor. 2. Please select any function you wish to activate by using the UP and DOWN buttons. 3. When the LEFT or RIGHT button is pressed, available values and modes are displayed in order.
-
Page 14: Lens
Lens This function is used to adjust the brightness of the screen. 1. When the SETUP menu is displayed on the screen, please position the arrow to point to LENS by using the UP and DOWN buttons. 2. Please select the type of the lens you wish to use by pressing the LEFT or RIGHT button. - DC: Select Auto Iris Lens You can adjust the minimum shutter and maximum value of ESC shutter mode when DC Lens mode is selected. -
Page 15: Exposure
Exposure 1. When the SETUP menu screen is displayed select EXPOSURE using the Up and Down buttons. 2. Select the desired mode using the Left and Right buttons. ● SHUTTER: Select either auto or manual shutter. - A.FLK: Select this when picture flicker is experienced, which can happen when there is a clash with the frequency of the installed lighting. -
Page 16: White Balance
Note • If you press the SET button in 'AUTO' mode, You can adjust brightness by increasing or decreasing the shutter speed. (X2~X512) • Note that the higher the level, the brighter the screen, but the more likely it is that an after-image will appear. -
Page 17: Backlight
Note • Under the following conditions the WHITE BALANCE function my not operate properly. In such cases, please select the AWC mode. 1. When the objects surroundings have a very high colour temperature (eg, a clear sky and sunset) 2. When the objects surrounding are dark. 3. -
Page 18: Dnr (Digital Noise Reduction)
Note • If the following symptoms occur when WDR is selected, deactivate it. 1. Color of screen changes unnaturally. 2. Noise appears in the brightest part of the screen. • As the performance of the WDR function can be affected by an area of brightness on the image, optimise the installation angle to eliminate any bright spots for the best performance. -
Page 19: Day & Night
Day & Night Pictures can be displayed in either color or black and white. 1. When the SETUP menu screen is displayed, select 'DAY/NIGHT' using the Up and Down buttons. 2. Select the desired mode using the Left and Right buttons. ●... - Page 20 ● FREEZE: View still pictures. ● V-REV: Flips the picture vertically on the screen. ● H-REV: Flips the picture horizontally on the screen. ● COLOR GAIN: It controls color gain. ● RESOLUTION: High resolution supports a sharp image and normal resolution supports a soft image. ●...
-
Page 21: Special
Special 1. Please position the arrow to point to SPECIAL on the SETUP menu by using the UP and DOWN buttons. 2. Select the desired mode using the Left and Right buttons. CAMERA ID: If a title is entered, the title appears on the monitor. 1. - Page 22 3. Press the SET button. 4. Use the 4 directional buttons to move to a character, and select it by pressing the SET button. Repeat this action to enter multiple characters. Up to 15 alphanumeric characters can be used. Note If the cursor is moved to CLR and the SET button pressed, all letters are deleted.
-
Page 23: Exit
SYNC: Two synchronisation modes are available, INTERNAL and EXTERNAL LINE-LOCK. In LINE- LOCK mode, it synchronises the video signal between cameras without a synchronous generator. The line-lock synchronisation is only used in areas of 60Hz (NTSC Models) / 50Hz (PAL Models). - INT: Internal synchronisation - LL: External line-lock synchronisation •... -
Page 24: Troubleshooting
Troubleshooting If there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from. Problems Troubleshooting Nothing appears on the screen. • Please check the power connection. • Please check the video signal line connection. •... -
Page 25: Specifications
Specifications Item NTSC Power Consumption AC24V/DC12V DC12V AC24V/DC12V DC12V 380mA(AC24V / 450mA 380mA(AC24V / 450mA 520mA (DC12V) 520mA (DC12V) Effective Pixels 976(H) x 494(V) 976(H) x 582(V) Image Sensor SONY 1/3“ Super HAD II Vertical Double Scan color CCD Scanning System 2:1 Interlace Synchronization INT / LL...
Need help?
Do you have a question about the CC-5307 and is the answer not in the manual?
Questions and answers