Main Features Spring Reverb - Stereoping SPRING REVERB Manual

Main features SPRING REVERB

Eurorack module to work with almost any reverb-tank, no matter if insulated or
•
grounded or whatever impedance
„Send Level" allows intended overdriving the tank's input coil over a wide range
•
(clean up to heavy distortion)
Active 4-band equalizer for creative soundshaping of the pure reverb signal
•
„Current" trimpot further alters the sound characteristics of the tank
•
„Mix" knob from 100% dry to 100 % wet - suitable for insert-usage
•
Width 60,6 mm / 12 TE, Depth about 25 mm
•
Current draw: +12 V - 23 mA, -12 V - 23 mA
•
Functional block diagram
Manual SPRING REVERB Eurorack V1.3
© Stereoping Germany, Hattingen 03/2015