Setting The Time - Bosch HBA 78B7.0 Instructions For Use Manual

The cooking time has
elapsed
Setting tips:
Adjusting the end time
Cancelling the end time

Setting the time

Following a power failure
Changing the time
A signal sounds. The oven stops heating. The cooking
time in the status bar is 00:00:00. You can cancel the
signal earlier by pressing the 0 button.
This is possible, providing the oven is on standby.
To do this, open the menu by pressing the 0 button.
Use the rotary selector to switch to end time, press
the X button and adjust the end time by turning the
rotary selector. Close the menu with the 0 button.
This is possible, providing the oven is on standby.
To do this, open the menu by pressing the 0 button.
Switch to end time by turning the rotary selector,
press the X button and shift the end time back by
turning the rotary selector until the display goes out.
Press the 0 button to close the menu.
The oven must be switched off before you can set or
change the clock.
The "Set clock" heading appears in the display
following a power failure.
1. Press the X button and turn the rotary selector to
set the current time.
2. Press the 0 button.
The time is applied.
Example: Changing from summer to winter time.
1. Press the 0 button.
The Time setting options menu opens.
2. Switch to the clock by turning the rotary selector.
3. Press the X button and turn the rotary selector to
change the time.
4. Press the 0 button.
The time setting options menu closes. The time is
changed.
29