Basic Operation; Rapid Heating; Time-Setting Options - Bosch HBA534B 3A Series User Manual And Installation Instructions

en Basic operation
Once the appliance has cooled down, clean the
6.
smooth surfaces in the cooking compartment with a
detergent solution and a dish cloth.

Basic operation

7 Basic operation
7.1 Switching the appliance on and off
To switch on the appliance, turn the function se-
1.
lector to any position other than the zero setting ⁠ .
To switch off the appliance, turn the function se-
2.
lector to the zero setting ⁠ .
7.2 Setting the type of heating and
temperature
Use the function selector to set the type of heating.
1.
Use the temperature selector to set the temperature
2.
or grill setting.
a The appliance starts heating after a few seconds.
When your food is ready, switch off the appliance.
3.
Tip: The most suitable type of heating for your food
can be found in the description of the type of heating.
→ "Types of heating and functions", Page 6

Rapid heating

8 Rapid heating
To save time, you can use rapid heating to shorten the
preheat time.
8.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Use the function selector to select rapid heating ⁠ .
1.
Use the temperature selector to set the temperature.
2.

Time-setting options

9 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
9.1 Overview of the time-setting options
Use the ⁠ button to select the different time-setting op-
tions.
Time-setting Use
option
Timer You can set the timer to run inde-
pendently of the operation. It does
not affect the appliance.
Cooking time If you set a cooking time, the appli-
ance stops heating automatically
once this time has elapsed.
10
Clean the accessories with soapy water and a dish
7.
cloth or soft brush.
Note: You can also set a cooking time and an opera-
tion end time on the appliance.
→ "Time-setting options", Page 10
Changing the type of heating
You can change the type of heating at any time.
Use the function selector to change the type of heat-
▶
ing.
a The appliance applies the change after a few
seconds.
Changing the temperature
You can change the temperature at any time.
Use the temperature selector to change the temper-
▶
ature.
a The appliance applies the change after a few
seconds.
Only use rapid heating when a temperature of over
100 °C has been set.
a Rapid heating starts after a few seconds.
a When the rapid heating process ends, an audible
signal sounds and the heating indicator goes out.
Use the function selector to set a suitable type of
3.
heating.
The most suitable types of heating are:
– 3D hot air
– Top/bottom heating
Place the food in the cooking compartment.
4.
Time-setting Use
option
End For the cooking time, you can set the
time at which you want the operation
to end. The appliance starts up auto-
matically so that the operation fin-
ishes at the required time.
Time You can set the time.
9.2 Setting the timer
The timer runs independently during the operation. You
can set the timer to times of up to 23 hours and 59
minutes, regardless of whether the appliance is on or
off. The timer has its own signal so that you can tell
whether it is the timer or a cooking time that has
elapsed.